Just what it says -- this is the place for any discussions not related to Buying, Selling and Trading ham gear. The discussion must be related to Ham Radio.
My wife bought me a new MC-60 microphone for Christmas for use with my KW 830S. The Mike cord came with a 8 pin connector and my radio has a 4 pin receptical. The paperwork that came with the mike says there is an adapter cord (PG-4A) available for this situation but nobody can tell me where to get one. Can any of you pros tell me what the pin to pin wiring is from the 8 pin connector to the 4 pin receiver. also where to get the necessesary connectors.
Thanks, Terry
Kenwood MC60-
1 (yellow) mic audio
2 (black) PTT
3 thru 6 are for Up/Down functions and +VDC (not used with 4 pin plug)
7 (shield) mic ground
8 (green) PTT ground
Kenwood 4 wire standard-
1 mic audio (yellow wire from MC60)
2 PTT (black)
3 PTT ground (green)
4 Audio ground (shield)