Icom-718

Just what it says -- this is the place for any discussions not related to Buying, Selling and Trading ham gear. The discussion must be related to Ham Radio.
Post Reply
Gary Slack
Posts: 5
Joined: Fri Jul 04, 2003 4:48 pm
Location: senecafalls,n.y. usa

Icom-718

Post by Gary Slack »

Does anyone know the tx and rx modification of the Icom-718? I just purchased one. And would like to modify it. Or if there are any mods to improve the radio? It would be very much appreciated. 73`s Gary-kc2jlw :D :D
W0LPQ
Posts: 83
Joined: Wed Mar 05, 2003 4:51 pm
Location: Greenwood, IN

718 Mods

Post by W0LPQ »

Why mod the radio? Nice one as it is. If you insist, look at the AB4OJ Icom site. Go to QRX and get his address..

73

Bill, WØLPQ
Gary Slack
Posts: 5
Joined: Fri Jul 04, 2003 4:48 pm
Location: senecafalls,n.y. usa

Icom-718

Post by Gary Slack »

Bill, Thanks very much for the info. I don`t know for sure if I will do any mods to the radio, but thought i`d see what mods there are for it. And your right it is a nice radio. 73`s Gary-kc2jlw
Gary Slack
Posts: 5
Joined: Fri Jul 04, 2003 4:48 pm
Location: senecafalls,n.y. usa

Icom-718

Post by Gary Slack »

Bill, I`ve tried the info you gave me and I get know where. Could you spell the address out a little simpliar? Such as www.----------com. 73`s Gary-kc2jlw
W0LPQ
Posts: 83
Joined: Wed Mar 05, 2003 4:51 pm
Location: Greenwood, IN

718 Mods

Post by W0LPQ »

Go to QRZ and look up AB4OJ. He has an Icom site with lots of info. The only mods I can think of is opening up the TX, which is not really useful, unless you want to transmit on CB...

Info...

http://www.qsl.net/ab4oj/icom/icom.html

73

Bill, WØLPQ
Gary Slack
Posts: 5
Joined: Fri Jul 04, 2003 4:48 pm
Location: senecafalls,n.y. usa

Icom-718

Post by Gary Slack »

Bill, Thanks much it is appreciated. 73`s-Gary-kc2jlw :D :x :D
Post Reply