shure mike for kenwood 120s
Posted: Wed Nov 19, 2003 11:59 pm
shure mike is a 4 pin, rig is 4 pin but don't possess manual to determine what pin goes where. any answers. john
120/130 and such:
1 - Mic Hi
2 - PTT
3 - Ground (PTT) Return
4 - Mic Ground
3 & 4 are grounded internally inside the radio.
Mic: Shure.com and find your mic. Not sure what you have, but the 120/120 are low Z input (600 ohm).
Had both.
73
Bill, WØLPQ