QTH.COM Swap Chat

My wife bought me a new MC-60 microphone for Christmas for use with my KW 830S. The Mike cord came with a 8 pin connector and my radio has a 4 pin receptical. The paperwork that came with the mike says there is an adapter cord (PG-4A) available for this situation but nobody can tell me where to get one. Can any of you pros tell me what the pin to pin wiring is from the 8 pin connector to the 4 pin receiver. also where to get the necessesary connectors.
Thanks, Terry

Kenwood MC60-
1 (yellow) mic audio
2 (black) PTT
3 thru 6 are for Up/Down functions and +VDC (not used with 4 pin plug)
7 (shield) mic ground
8 (green) PTT ground

Kenwood 4 wire standard-
1 mic audio (yellow wire from MC60)
2 PTT (black)
3 PTT ground (green)
4 Audio ground (shield)

Hope this helps.

This is exacty what I needed, thanks for the info. Now if I can only find a sorce for the connectors I need.