NC 300 Power Supply

This is the place to discuss the QTH.com Classifieds (http://swap.qth.com). Please be constructive.
Post Reply
W4AKI
Posts: 1
Joined: Sun Nov 25, 2007 2:52 am

NC 300 Power Supply

Post by W4AKI »

I have an early NC 300 with the choke in the PS . It has been heavily modified ie solid-stated and OB2 removed . I want to return it to its original configuration . I need a schematic of an early model with the choke. I have the schematic off the BAMA mirror with the 330 ohm resistor . It really doesn't help in returning the rcvr to original . If anyone can help by sending me a copy of an early schematic I'd be much obliged . Thanks , Frank Drewniany, W4AKI .
Top
n5wrx
Posts: 91
Joined: Sat Jun 10, 2006 5:00 pm
Location: Corpus Christi, Texas
Contact:
Contact n5wrx

Re: NC 300 Power Supply

Post by n5wrx »

W4AKI wrote:I have an early NC 300 with the choke in the PS . It has been heavily modified ie solid-stated and OB2 removed . I want to return it to its original configuration . I need a schematic of an early model with the choke. I have the schematic off the BAMA mirror with the 330 ohm resistor . It really doesn't help in returning the rcvr to original . If anyone can help by sending me a copy of an early schematic I'd be much obliged . Thanks , Frank Drewniany, W4AKI .
Might I suggest placing your ad in the wanted section of this web site?
You would most likely have better luck finding what you need if you did.
Top
Post Reply

Return to “QTH.com Classifieds Discussion”