Kenwood TV-502
Kenwood TV-502
I am looking for a schematic or even the cables to connect a TV-502 (2 meter transverter) to my TS-520S. Can anyone help?
TV-502 Kenwood 2 Meter Transverter
Since I don't really understand what you have or have not for the TV-502 XVTR, then go to the following Boat Anchors URL and download the three (3) PDF documents for wiring configuration and schematics:
http://bama.edebris.com/manuals/kenwood/tv502/
And scroll down to FILES to download the 3 documents you'll need.
If you don't have the 8-Pin Kenwood Rectangular Plug then this could be a stumbling block although if you are resourceful and creative, you could modify those Male & Female connectors to DB-25 (computer connectors) or sometine on that size configuration. The other connectors that interface with your TS-530 are RCA Phono Plugs with small RG-58A/U coaxial cable.
Oh, when you do manage to get everything working like it should, the TV-502 Transverter will be sensative to a high VSWR > 1.5:1 so make sure you've got a good match on your 2 Meter Horizontal Yagi Antenna. I recommend using LMR-400, 1/2" or 7/8" Andrews Heliax with N connectors depending on how long your main feedline run is and RG-213/U for the loop around the mast / rotor pipe to the antenna feed point.
Dan
WA9WVX
http://bama.edebris.com/manuals/kenwood/tv502/
And scroll down to FILES to download the 3 documents you'll need.
If you don't have the 8-Pin Kenwood Rectangular Plug then this could be a stumbling block although if you are resourceful and creative, you could modify those Male & Female connectors to DB-25 (computer connectors) or sometine on that size configuration. The other connectors that interface with your TS-530 are RCA Phono Plugs with small RG-58A/U coaxial cable.
Oh, when you do manage to get everything working like it should, the TV-502 Transverter will be sensative to a high VSWR > 1.5:1 so make sure you've got a good match on your 2 Meter Horizontal Yagi Antenna. I recommend using LMR-400, 1/2" or 7/8" Andrews Heliax with N connectors depending on how long your main feedline run is and RG-213/U for the loop around the mast / rotor pipe to the antenna feed point.
Dan
WA9WVX
Kenwood TV-502
Sorry I was not very clear. I am looking for the Pin out or schematic for the cables that connect the TV-502 to the TS-520. I am quit sure I am going to have to modify the connectors as I have never seen these before.
And thanks for the tip on the LMR 400 as this is what I run. A pair of stacked scorpion II cubes from cubex. actualy right now only one but the second will be in place soon!
And thanks for the tip on the LMR 400 as this is what I run. A pair of stacked scorpion II cubes from cubex. actualy right now only one but the second will be in place soon!
Kenwood TS-520S Transceiver
Ok Ed,
This sounds like you want the TS-520S H.F. Transceiver Manual, I'll include the original TS=520 H.F. Transceiver Info too.
http://bama.edebris.com/manuals/kenwood/ts520s/
http://bama.edebris.com/manuals/kenwood/ts520/
One of these two manuals ought to provide the basic information as to the Wiring configuration to and from the TV-502 Transverter.
73,
Dan
WA9WVX
This sounds like you want the TS-520S H.F. Transceiver Manual, I'll include the original TS=520 H.F. Transceiver Info too.
http://bama.edebris.com/manuals/kenwood/ts520s/
http://bama.edebris.com/manuals/kenwood/ts520/
One of these two manuals ought to provide the basic information as to the Wiring configuration to and from the TV-502 Transverter.
73,
Dan
WA9WVX
Kenwood TV-502
Yes you are correct It is the ts-520s. And Thanks very much for your help. If you happen upon any resource for the connnectors please let me know.
"N" Type RF Connectors LMR-400
Hello Ed,
RF Parts is a source for the LMR-400 "N" Type RF Connectors and their Part # RFN-1002-1SI
http://www.rfparts.com/c-typen.html
Davis RF - RFN-1002-1SI
http://www.davisrf.com/coaxconn.php
Surplus Sales of Nebraska - Part $ (CRF) NM9913
http://www.surplussales.com/Connectors/N-4.html
The RF Connection - Part # 82-202-1006 or UG-21D / 9913
http://www.therfc.com/ Then scroll down to N Series
73,
Dan
WA9WVX
RF Parts is a source for the LMR-400 "N" Type RF Connectors and their Part # RFN-1002-1SI
http://www.rfparts.com/c-typen.html
Davis RF - RFN-1002-1SI
http://www.davisrf.com/coaxconn.php
Surplus Sales of Nebraska - Part $ (CRF) NM9913
http://www.surplussales.com/Connectors/N-4.html
The RF Connection - Part # 82-202-1006 or UG-21D / 9913
http://www.therfc.com/ Then scroll down to N Series
73,
Dan
WA9WVX