FT 900 Flashing Display

Just what it says -- this is the place for any discussions not related to Buying, Selling and Trading ham gear. The discussion must be related to Ham Radio.
Post Reply
kc0kbp
Posts: 5
Joined: Thu Mar 23, 2006 3:59 pm

FT 900 Flashing Display

Post by kc0kbp »

Hello all, I have a FT-900 that has just developed a problem, I had been on a trip, and upon arriving home I had a Flashing display on my FT 900. It is a bit odd as it is from 21.500 to 30.000 mhz. When it goes to any freq in this range, the audio leaves, and the display starts flashing. Any Ideas? Is it an easy repair? Has anyone else had this happen? Let me know and Thanks for reading. Cheers, Bob :cry: :?
Top
K4ICL
Posts: 663
Joined: Wed Mar 05, 2003 1:07 pm
Location: Greenville, SC
Contact:
Contact K4ICL

Backup battery good?

Post by K4ICL »

Could it be telling you the backup battery has quit and needs to be replaced.

Just a thoughtl....

AL
Top
WA9WVX
Posts: 103
Joined: Tue Aug 09, 2005 2:31 am
Location: QRZ Indicates Northern Illinois

FT 900 Flashing Display

Post by WA9WVX »

Hi Bob,

Yaesu normally reserves the Blinking or Flashing to indicate that the PLL in your case is intermittently Out Of Lock. You will need to perform an alignment procedure on your FT-900 transceiver.

73,

Dan
WA9WVX
Top
Post Reply

Return to “Free For All -- Talk about anything related to Ham Radio.”