KENWOOD TS-950S I KENWOOD TS-950SD HOW TO RECOGNISE THAT.
Ok RigPix:only.
IS TS-950S http://www.rigpix.com/kenwood/ts950s.htm
IS TS-950SDX http://www.rigpix.com/kenwood/ts950sdx.htm
( NO Kenwood TS-950SD ) ?? Where do look for information
IS TS-950S http://www.rigpix.com/kenwood/ts950s.htm
IS TS-950SDX http://www.rigpix.com/kenwood/ts950sdx.htm
( NO Kenwood TS-950SD ) ?? Where do look for information
I got photos of Kenwood TS-95SD
Where is TCXO.
Where to look for him in these photos
.
1) http://obrazki.elektroda.net/97_1314473835.jpg
2) http://obrazki.elektroda.net/94_1314473835.jpg
3) http://obrazki.elektroda.net/34_1314473835.jpg
4) http://obrazki.elektroda.net/12_1314473835.jpg
5) http://obrazki.elektroda.net/61_1314473835.jpg
6) http://obrazki.elektroda.net/56_1314474076.jpg
7) http://obrazki.elektroda.net/16_1314474076.jpg
http://obrazki.elektroda.net/64_1314474076.jpg
9) http://obrazki.elektroda.net/26_1314474076.jpg
Where is TCXO.
Where to look for him in these photos
.
1) http://obrazki.elektroda.net/97_1314473835.jpg
2) http://obrazki.elektroda.net/94_1314473835.jpg
3) http://obrazki.elektroda.net/34_1314473835.jpg
4) http://obrazki.elektroda.net/12_1314473835.jpg
5) http://obrazki.elektroda.net/61_1314473835.jpg
6) http://obrazki.elektroda.net/56_1314474076.jpg
7) http://obrazki.elektroda.net/16_1314474076.jpg
http://obrazki.elektroda.net/64_1314474076.jpg
9) http://obrazki.elektroda.net/26_1314474076.jpg
.
sq9oky
VY''73 All''
sq9oky
VY''73 All''
OK i copied this from another site and this was the only comment about the SDX..
I think you have that backwards. The SD model was the same as the base
950S with the DSP installed. The SDX was a later version. There was a
QST review of the SDX that concentrated on the differences. Ones I
remember are DSP installed with some more functions, different types of
final transistors (bipolar vs FET I think), some additional memory
functions. I believe the consensus was that the SDX was a better
receiver but the S/SD is a cleaner transmitter.
You can also go to E Ham.net and go to reviews and read owners comments on all three of the 950's...
I think you have that backwards. The SD model was the same as the base
950S with the DSP installed. The SDX was a later version. There was a
QST review of the SDX that concentrated on the differences. Ones I
remember are DSP installed with some more functions, different types of
final transistors (bipolar vs FET I think), some additional memory
functions. I believe the consensus was that the SDX was a better
receiver but the S/SD is a cleaner transmitter.
You can also go to E Ham.net and go to reviews and read owners comments on all three of the 950's...
Larry Huff K0pd
From what i've heard is that the Kenwood 950 is a nightmare for Technicians to work on. As for the Yaesu does it have the updated ROM? I know it would be a hard choice to pick from but as far as i know $1200 euro's sounds about like how they would bring in American Dollars of close to $2,000 dollars depending of course the over all condition of the radios. I do not think either one will dissapoint you.
Larry Huff K0pd