Hi, this question is for someone familiar with the FT-767GX. I have one and when you tune the VFO knob sometimes it won't tune at all for a second,then it may tune and then it may jump only when spinning dial on fast tune. The encoder is FINE, I believe this to be an electronic issue not a mechanical issue. Again, I am sure someone familair with the FT-767GX can help me. Thanks for any input.
Adam Farber W4AJF
Cooper City, FL
adamf@eeco.com
Yaesu FT-767GX VFO tuning problem (encoder is fine!).
Try consulting your unit's user manual. If you don't have it, you can download one from the Internet for free.
__________________
Yaesu FT-857 All Mode Transceiver - Get the Yaesu FT-857 Ultra Compact HF/VHF/UHF 100 W All Mode Transceiver Catalog
__________________
Yaesu FT-857 All Mode Transceiver - Get the Yaesu FT-857 Ultra Compact HF/VHF/UHF 100 W All Mode Transceiver Catalog
encoder
how does it tune using the up/down switches on the mike.
Bad encoders may look good but have very fine slots. any mis alignment or dirt cause weird tuning
you wuold need to check it with a "scope" to verify it is "good"/
don
Bad encoders may look good but have very fine slots. any mis alignment or dirt cause weird tuning
you wuold need to check it with a "scope" to verify it is "good"/
don