AL-811 TUBE SOCKETS HELP

Just what it says -- this is the place for any discussions not related to Buying, Selling and Trading ham gear. The discussion must be related to Ham Radio.
Post Reply
WG4REB
Posts: 2
Joined: Sun Oct 14, 2007 3:45 pm
Location: ROCKWELL NC

AL-811 TUBE SOCKETS HELP

Post by WG4REB »

Does anyone have any pictures they can send me of the tube socket wiring on an AL-811 amplifier. I did something stupid. I replaced the tube sockets in my 811 and have rewired something wrong and I nee some pics of the wiring. Thanks for any help. My E-Mail address is WG4REB@AOL.COM
Thanks
Fred :(
Top
wa8mea
Posts: 82
Joined: Sun Feb 25, 2007 10:11 pm

Post by wa8mea »

-
Last edited by wa8mea on Wed Jan 30, 2013 2:01 am, edited 1 time in total.
Top
k4ujq
Posts: 11
Joined: Wed Jan 25, 2006 10:35 pm

al-811

Post by k4ujq »

Shouldn't be too much of a problem, since the 811 is a triode.
Pins 1 and 4 (The two large ones) are the filaments
Pin 3 is the Grid
Pin 2 is NC (although sometimes it is used as a simple tie point) but it is not internally connected in the tube.
Good Luck
Gene
Top
Post Reply

Return to “Free For All -- Talk about anything related to Ham Radio.”