yAESU 1000 D VFO A problem.
Posted: Tue Nov 17, 2020 12:01 am
My 1000 D VFO A works on PKT, RTTY, FM, and AM on CW and USB (on all bands)
Sounds like a high hiss as a filter hiss (maybe)
On the lower bands the radio must be in LSB to operate in USB mode.
Upper bands the radio still seems to be in USB even though I put it in LSB.
Sub VFO B seems to work fine. This started during CQWW. When I tapped on the right corner of the radio the
problem corrected. But after a few times of doing this the problem will not go away now. I have the radio open
and spent several hours with no luck. Not sure if anyone had the same issue or can stear me in the
right direction. Any help would be appreciated.
Thanks, KE3KU
Sounds like a high hiss as a filter hiss (maybe)
On the lower bands the radio must be in LSB to operate in USB mode.
Upper bands the radio still seems to be in USB even though I put it in LSB.
Sub VFO B seems to work fine. This started during CQWW. When I tapped on the right corner of the radio the
problem corrected. But after a few times of doing this the problem will not go away now. I have the radio open
and spent several hours with no luck. Not sure if anyone had the same issue or can stear me in the
right direction. Any help would be appreciated.
Thanks, KE3KU