QTH.COM Swap Chat

Does anyone have any pictures they can send me of the tube socket wiring on an AL-811 amplifier. I did something stupid. I replaced the tube sockets in my 811 and have rewired something wrong and I nee some pics of the wiring. Thanks for any help. My E-Mail address is WG4REB@AOL.COM
Thanks
Fred

-

Shouldn't be too much of a problem, since the 811 is a triode.
Pins 1 and 4 (The two large ones) are the filaments
Pin 3 is the Grid
Pin 2 is NC (although sometimes it is used as a simple tie point) but it is not internally connected in the tube.
Good Luck
Gene