antenna tower I/D ?
Posted: Sun Aug 22, 2010 4:00 pm
Help!
I just acquired a Pre-Pre owned 26 ft free standing tower and wouuld like to I/D same It resembles an American 25 series and a Rohn 25G.Specs are legs 1.25x .065 (16 Ga) 11" centers 12 1/4 outside width.Lacing is 1/4 'Dia round steel rod.Tower is galvanized steel with 2 bolts on each leg joint.I estimat it to be a mid 1980's to 90's production unit.Previous owner aquired it used about 10 yrs ago.It was used to support a TV antenna at its previous location.I'd like to aquire 2 more 10' sections and hinge mount them to the 6' section which I'll set in concrete.It can get windy in N.E.Florida so a tilt base is definately in order.
Any and all info would be greatly appreciated.
73 4 now
Paul
Soon 2 B in 4 Land
I just acquired a Pre-Pre owned 26 ft free standing tower and wouuld like to I/D same It resembles an American 25 series and a Rohn 25G.Specs are legs 1.25x .065 (16 Ga) 11" centers 12 1/4 outside width.Lacing is 1/4 'Dia round steel rod.Tower is galvanized steel with 2 bolts on each leg joint.I estimat it to be a mid 1980's to 90's production unit.Previous owner aquired it used about 10 yrs ago.It was used to support a TV antenna at its previous location.I'd like to aquire 2 more 10' sections and hinge mount them to the 6' section which I'll set in concrete.It can get windy in N.E.Florida so a tilt base is definately in order.
Any and all info would be greatly appreciated.
73 4 now
Paul
Soon 2 B in 4 Land