QTH.COM Swap Chat

Hello,
Looking for cable wiring for this 8-Pin Mini-DIN control cable. Looking at the radio and tuner connector pinouts, I have most of the connections; but I don't like to guess.

Looks like this might be a straight pin-to-pin wiring (i.e. 1-1, 2-2, and etc.). Can anyone confirm or provide a schematic, otherwise?

Assistance is greatly appreciated.
Thanks,
Bob
KI4SBL

Okay, I figured out the cable wiring and will answer my own post.

For use with the FT-847 and tuner control cable is wired in a straight one-to-one fashion, so 1-1, 2-2, ... 8-8. Use the standard 8-Pin connector like part number CP-2080-ND from DigiKey on both ends. And good luck soldering those small wires!

Bob
ki4sbl