Page 1 of 1
Need a tuner cable
Posted: Fri Nov 19, 2010 2:17 am
by w9mkm
Does anybody know where I can get, or if anyone makes the tuner cable that goes from a Kenwood TS-50 to a Kenwood AT-50 auto tuner? Mine seems to have a short in it. Thanks...Mark W9MKM
Posted: Fri Jan 14, 2011 3:03 pm
by KE3W
I searched the net and found one on:
http://www.partstore.com/Part/Kenwood/K ... M/New.aspx
PG-4M Control Cable 6 M TS-50S AT-50 ($55.95)
Part #: ZPG-4M
Availability: Usually ships in 4 - 6 business days
Posted: Sat Jan 15, 2011 3:14 pm
by k9yli
duh fix it.
get your ohm meter and wring out the wires end to end to find an open..
also check each wire to all others for shorts..
most likely problems are broken wires near the conectors from being
bent to a curve less than about radius'.
or the broken wire broke right at the connection in the connector and also is touching a wire next to it. ..
molded connectors,, just razor knife them and refill with rtv/silicon goop.
patch cord
Posted: Sun Mar 13, 2011 5:26 pm
by N7HNM
I bought two TS-480 (KENWOOD) accessory plugs, and building my own.
Bill N7HNM